SN74GTLPH306PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 175MHz |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Current - Output | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 8 ns |
| Family | GTLP |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.05 A |
| Control Type | COMMON CONTROL |
| Translation | GTL/P & LVTTL |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTLPH306PWRE4 Overview
There is an embedded version of it in package TSSOP.Tape and Reel is the way it is packaged.Ending a transmission line involves 24 terminations.In order to power the device, a voltage supply of 3.3V is required.Level translators is equipped wLevel translatorsh 24 pin count.Level translators is designed wLevel translatorsh 24 pins.8 Bits are used in the design of this electronic part.3.45V is the maximum voltage it supports.In order for the machine to operate, the supply voltage must be 3.15V.This electronic part is mounted in the way of Surface Mount.Level translators is part of Bus Driver/Transceivers.Logic ICs it uses are of the BUS TRANSCEIVER type.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.In the world of electronics, this electronic device belongs to the family of GTLP.A high efficiency supply voltage should be maintained at 3.3V.Temperatures above -40°C are recommended.Level translators is recommended to work at a temperature lower than 85°C.In total, it has 1 elements.This device features maximum design flexibility due to its output current of 50mA.In this case, the frequency is 175MHz.
SN74GTLPH306PWRE4 Features
TSSOP package
24 pin count
24 pins
1 elements
SN74GTLPH306PWRE4 Applications
There are a lot of Texas Instruments SN74GTLPH306PWRE4 voltage translators & level shifters applications.
- Debouncing a Mechanical Switch
- Controlled Baseline
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Telematics
- Available in Military (–55°C/125°C) Temperature Range
- One Assembly
- Driving Indicator LEDs or Buzzers
- Personal Electronics
- Test Site
- I2C / SMBus
