SN74GTLPH306PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 175MHz |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Current - Output | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 8 ns |
| Family | GTLP |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.05 A |
| Control Type | COMMON CONTROL |
| Translation | GTL/P & LVTTL |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTLPH306PWRG4 Overview
Embedded in the TSSOP package, it is available for you to use.Packaged as Tape and Reel.Transmission lines are terminated using 24 terminations.This device is powered by a supply voltage of 3.3V which is applied to it.Pin count is 24.With 24 pins, it is designed.An electronic part with 8 bits is designed.Voltages above 3.45V are supported.There is a minimum supply voltage of 3.15V for it.With the Surface Mount method, it is mounted.In Bus Driver/Transceivers, this part is included.Level translators uses the logic IC BUS TRANSCEIVER.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.Electronic devices like this belong to the family GTLP.For maximum efficiency, the supply voltage should be set to 3.3V.Level translators is recommended that the operating temperature be higher than -40°C.A temperature below 85°C should be used for operation.Level shifter consists of 1 elements.In addition to its maximum design flexibility, 50mA features the lowest output current.The frequency that can be achieved is 175MHz.
SN74GTLPH306PWRG4 Features
TSSOP package
24 pin count
24 pins
1 elements
SN74GTLPH306PWRG4 Applications
There are a lot of Texas Instruments SN74GTLPH306PWRG4 voltage translators & level shifters applications.
- Telecommunications
- Eliminate slow or noisy input signals
- Test Site
- Telecom
- Debouncing a mechanical switch
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- One Fabrication Site
- Handset
- Product Traceability
- Data and Clock Transmission Over Backplane
