SN74GTLPH32916ZKFR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 114-LFBGA |
| Number of Pins | 114 |
| Weight | 200.204332mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74GTLPH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 114 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Base Part Number | 74GTLPH32916 |
| Pin Count | 114 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 34-Bit |
| Number of Ports | 2 |
| Number of Bits | 34 |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Transceiver |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Prop. Delay@Nom-Sup | 6 ns |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 6.5 ns |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 100mA |
| Translation | GTLP & LVTTL |
| Height Seated (Max) | 1.4mm |
| Length | 16mm |
| Width | 5.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74GTLPH32916ZKFR Overview
It is embedded in the 114-LFBGA package. In the way of Tape & Reel (TR), it is packaged. A 34-Bit circuit achieves its superior flexibility by using 34-Bit components. Logic type Universal Bus Transceiver describes this electrical device. I have mounted this electronic part in the way of Surface Mount in this way. It is better to have an operating temperature higher than -40°C~85°C. The high/low output current of 24mA 24mA enables maximum design flexibility. As part of the 74GTLPH series, it is a type of FPGA. It operates with a supply voltage of 3.15V~3.45V. It is a member of the 74GTLPH32916 family. There are 114 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to function normally, the supply voltage should be higher than 3.3V. This device is equipped with 114 pins. The electronic part was designed using 34 Bits. It is possible to terminate a transmission line with a device that matches the line's characteristic impedance, known as 2 terminations. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. It is designed with 114 pins. At this point, Vsup reaches its maximum value. It is recommended that the supply voltage (Vsup) should be greater than 3.15V. In the configuration, it uses the trigger POSITIVE EDGE to trigger the event. This device is well suited for TAPE AND REEL based on its reliable performance. 3.3V is the supply voltage for this electrical part. 125MHz is the maximum frequency that can be achieved.
SN74GTLPH32916ZKFR Features
114-LFBGA package
74GTLPH series
74GTLPH32916 family
114 pin count
114 pins
SN74GTLPH32916ZKFR Applications
There are a lot of Texas Instruments SN74GTLPH32916ZKFR Universal Bus Functions applications.
- Grid adaptation function
- Communication
- Car refrigerator
- Small and medium off-grid systems
- Mobile caravan
- General AND Logic Operation
- DVD
- Digital driver ICs
- Disk read-write IC
- Cell phone
