SN74GTLPH32945ZKER
| Parameters | |
|---|---|
| Pin Count | 96 |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 4 |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Propagation Delay (tpd) | 6.3 ns |
| Channel Type | Bidirectional |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 100mA |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 8 |
| Length | 13.5mm |
| Width | 5.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Surface Mount | YES |
| Number of Pins | 96 |
| Weight | 166.610147mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74GTLPH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Frequency | 175MHz |
| Base Part Number | 74GTLPH32945 |
SN74GTLPH32945ZKER Overview
A package called 96-LFBGA contains it.This package has the format of Tape & Reel (TR).This output is configured with Non-Inverted.Mixed Signal is the translator type of this electrical device.Level translators is mounted according to the Surface Mount method.There is Bidirectional channel type for this electrical device.The operating temperature is -40°C~85°C TA.The superior flexibility of the system is achieved through its use of 4 circuits.A transmission line can be terminated with 96 terminations.A series of related parts can be determined from the base part number 74GTLPH32945.Level translators is powered by a 3.3V supply.96 pins are present on this board.The device is a member of the 74GTLPH series.Designed with 96 pins, it is compatible with a wide range of devices.Electronic parts are designed with a number of bits of 32.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.TAPE AND REEL is well suited to this device because of its reliability.For maximum efficiency, the supply voltage should be set to 3.3V.In order to operate normally, Vsup must remain above 3.15V.There is 175MHz frequency that can be achieved.
SN74GTLPH32945ZKER Features
96-LFBGA package
4 circuits
96 pin count
74GTLPH series
96 pins
SN74GTLPH32945ZKER Applications
There are a lot of Texas Instruments SN74GTLPH32945ZKER voltage translators & level shifters applications.
- One Assembly and Test Site
- One Assembly
- Available in Military (–55°C/125°C) Temperature Range
- Industrial
- Telematics
- GPIO
- Products With Many I
- MDIO
- TVs
- Controlled Baseline
