SN74HC109DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | AND, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 58 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC109DRG4 Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. The package Tape & Reel (TR)contains it. There is a Differentialoutput configured with it. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2V~6Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. This electronic flip flop is of type JK Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. This D flip flop should not have a frequency greater than 60MHz. Despite external influences, it consumes 4μAof quiescent current. The number of terminations is 16. Members of the 74HC109family make up this object. It is powered by a voltage of 5V . A JK flip flop with a 3pFfarad input capacitance is used here. The electronic device belongs to the HC/UHfamily. There is an electronic part mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 6V. Normal operation requires a supply voltage (Vsup) above 2V. In order to achieve its superior flexibility, 2 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. In order to ensure high efficiency, the supply voltage should remain at 5V. With a current output of 5.2mA , it offers maximum design flexibility. Furthermore, it has DUMMY VALas a characteristic.
SN74HC109DRG4 Features
Tape & Reel (TR) package
74HC series
16 pins
SN74HC109DRG4 Applications
There are a lot of Texas Instruments SN74HC109DRG4 Flip Flops applications.
- QML qualified product
- High Performance Logic for test systems
- Divide a clock signal by 2 or 4
- Parallel data storage
- Load Control
- ESCC
- Shift registers
- Count Modes
- Computers
- Latch-up performance
