SN74HC109DT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Additional Feature | DUMMY VAL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 60MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SN74HC109DT Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). The Tape & Reel (TR)package contains it. It is configured with Differentialas an output. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C TAis used in the operation. Logic flip flops of this type are classified as JK Type. JK flip flop is a part of the 74HCseries of FPGAs. It should not exceed 60MHzin terms of its output frequency. A total of 2elements are present in it. Despite external influences, it consumes 4μAof quiescent current. A total of 16 terminations have been made. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 3pF farads at the input. An electronic device belonging to the family HC/UHcan be found here. It reaches the maximum supply voltage (Vsup) at 6V. For normal operation, the supply voltage (Vsup) should be above 2V. Additionally, it is characterized by DUMMY VAL.
SN74HC109DT Features
Tape & Reel (TR) package
74HC series
SN74HC109DT Applications
There are a lot of Rochester Electronics, LLC SN74HC109DT Flip Flops applications.
- Common Clocks
- Functionally equivalent to the MC10/100EL29
- Consumer
- Registers
- Matched Rise and Fall
- Single Down Count-Control Line
- Event Detectors
- Latch
- Safety Clamp
- Frequency Divider circuits
