SN74HC10DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | 74HC10 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Number of Elements | 3 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 25mA |
| Propagation Delay | 16 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | NAND |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | NAND Gate |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 16ns @ 6V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.5V ~ 1.8V |
| Logic Level - High | 1.5V ~ 4.2V |
| Power Supply Current-Max (ICC) | 0.02mA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC10DR Overview
Shipping overseas is convenient due to the part's packing in 14-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Cut Tape (CT) is used. A NAND Gate logic principle governs its operation. A voltage of 2V~6V is required for the part to function properly. Increasing operating temperature to around -40°C~85°C. Surface Mount is the location of the part. 5.2mA 5.2mA is the output current's high and low states. This is part of the 74HC series. In total, there have been 14 terminations. Users will benefit significantly from 3 functions in this part. It is part of the HC/UH family of chips. Try searching with 74HC10 if you're looking for device variants. 14 pins are injected into the part body. This logic device is widely used in a wide variety of applications because it is Surface Mount mounted. You can find the functions of the 14 pins in the datasheets. It has 2μA current flowing through it when it is quiescent. There is a standard Gates logic device here. There is 50pF load capacitance associated with the part. Devices require a minimum voltage of 2V. It reaches 6V when the supply voltage is maximal (Vsup). There is an industry TR method included. As specified in datasheets, the part requires 2/6V power supplies. 25mA is the device's output current rating. The device has 1 outputs. Operation is based on 3 elements in total. There is a specification for the operating voltage of the chip, 5VV, which is referred to as the supply voltage.
SN74HC10DR Features
NAND Gate Logic Type
Operating Temperature: -40°C~85°C
HC/UH Family
Quiescent Current: 2μA
Output Current: 25mA
SN74HC10DR Applications
There are a lot of Texas Instruments SN74HC10DR Gates and Inverters applications.
- Electricity for military and civilian life in areas without electricity
- Urban rail vehicle
- Ship
- Overvoltage and undervoltage protection
- Fax machine
- Various travel, camping, medical emergency appliances
- Small and medium distributed photovoltaic power generation system
- VCR
- Electric car
- Residual current/leakage current protection
