SN74HC112DE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 125 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop, JK-Type |
| Logic IC Type | J-K FLIP-FLOP |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| High Level Output Current | 5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Negative Edge |
| Length | 9.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC112DE4 Overview
The flip flop is packaged in a case of SOIC. A total of 2elements are present in it. A total of 16terminations have been recorded. A voltage of 5V provides power to the D latch. An electronic device belonging to the family HC/UHcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Negative Edge. The part you are looking for is included in FF/Latches. In light of its reliable performance, this T flip flop is well suited for TUBE. High efficiency requires the supply voltage to be maintained at 5V. In order to operate, the chip has 3 output lines. 5.2mAis set as the high level output current. A 5.2mAvalue is set for low-level output current. Temperatures below 85°Care ideal for operating. A temperature above -40°Cshould be used for the operation. It is powered by 2V as its minimum supply voltage. The maximum supply voltage supported by the flip flop is 6V. We are able to achieve a frequency of 60MHz. The logic IC it adopts is J-K FLIP-FLOP. It is equipped with 2 functions . A total of 16 pins are present on this device. It offers maximum design flexibility with its output current of 5.2mA.
SN74HC112DE4 Features
16 pins
2 Functions
16 pin count
SN74HC112DE4 Applications
There are a lot of Texas Instruments SN74HC112DE4 Flip Flops applications.
- Circuit Design
- Latch
- Memory
- QML qualified product
- ESD performance
- Shift Registers
- Divide a clock signal by 2 or 4
- Storage registers
- ATE
- Registers
