SN74HC11DT
| Parameters | |
|---|---|
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | AND Gate |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 17ns @ 6V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.5V ~ 1.8V |
| Logic Level - High | 1.5V ~ 4.2V |
| Power Supply Current-Max (ICC) | 0.02mA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | 74HC11 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Max Output Current | 5.2mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 3 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Propagation Delay | 17 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 25 ns |
| Family | HC/UH |
| Logic Function | AND |
SN74HC11DT Overview
Shipping overseas is convenient with the part packed in 14-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. According to AND Gate logic, the algorithm works. A voltage of 2V~6V is required for the part to function properly. Operating temperature around -40°C~85°C extended. It is mounted in position Surface Mount. The high and low state of output current is 5.2mA 5.2mA. This is part of the 74HC series. A total of 14 terminations have been recorded. A significant improvement in the user experience can be achieved by the part since it has 3 functions. I would like to point out that this chip is part of HC/UH. 74HC11 can be used to search for device variants. It is injected into the part body with 14 pins. There are many applications for this logic device, mounted at Surface Mount. The datasheets for the 14 pins explain the functions. Parts that are quiescent have 2μA current flowing through them. There is a standard Gates logic device here. It has a load capacitance of 50pF. To supply the device, it requires a voltage of 2V. The supply voltage should not exceed 6V. There is a method TR in it that is designed for the industry. Datasheets indicate that this part requires 2/6V power supply. In this case, the output current is rated as 5.2mA. This device has 1 outputs. Totally, there are 3 elements used for operation. It is specified in the operating instructions of the chip that the operating voltage will be 5V volts.
SN74HC11DT Features
AND Gate Logic Type
Operating Temperature: -40°C~85°C
HC/UH Family
Quiescent Current: 2μA
Output Current: 5.2mA
SN74HC11DT Applications
There are a lot of Texas Instruments SN74HC11DT Gates and Inverters applications.
- Hair dryer
- Car
- Island protection
- Flashlight
- Digital camera
- Agriculture and light complementary power station
- Photovoltaic grid-connected power system
- Air conditioner
- Laptop
- Electricity for military and civilian life in areas without electricity
