SN74HC11PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | 74HC11 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Max Output Current | 5.2mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 3 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Propagation Delay | 17 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 25 ns |
| Family | HC/UH |
| Logic Function | AND |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | AND Gate |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 17ns @ 6V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.5V ~ 1.8V |
| Logic Level - High | 1.5V ~ 4.2V |
| Power Supply Current-Max (ICC) | 0.02mA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC11PW Overview
Shipped in 14-TSSOP (0.173, 4.40mm Width), the part is easy to ship overseas. High reliability is provided by advanced packaging method Tube. AND Gate logic governs its operation. This part needs a voltage of 2V~6V to function properly. Operational temperature extended around -40°C~85°C. Surface Mount is the mounting position of the part. In both high and low states, output current is 5.2mA 5.2mA. The series 74HC contains it. In total, 14 terminations have occurred. 3 functions in the part enhance the user experience significantly. I would like to point out that this chip is part of HC/UH. Try searching with 74HC11 if you're looking for device variants. It is injected into the part body with 14 pins. It is widely used in a variety of applications due to its Surface Mount mounting. You can find the functions of the 14 pins in the datasheets. The part has 2μA current flowing through it in the quiescent state. The logic device shown here is a typical Gates. There is 50pF load capacitance associated with the part. To supply the device, a voltage of 2V must be applied. When 6V is reached, the maximum supply voltage (Vsup) is reached. A 2/6V power supply is specified in the datasheet for this part. Current output of the device is rated at 5.2mA. A device with 1 outputs is available. For operation, 3 elements are used. There is a specified operating supply voltage for the chip of 5V volts.
SN74HC11PW Features
AND Gate Logic Type
Operating Temperature: -40°C~85°C
HC/UH Family
Quiescent Current: 2μA
Output Current: 5.2mA
SN74HC11PW Applications
There are a lot of Texas Instruments SN74HC11PW Gates and Inverters applications.
- Printer
- Solar energy generation
- Fan
- MPPT function (maximum power point tracking)
- Flashlight
- Overcurrent/Short circuit protection
- Washing machine
- Fishery-optical complementary power station
- Electrical tools
- Audio
