SN74HC125D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC125 |
| Pin Count | 14 |
| Output Type | 3-State |
| Max Output Current | 7.8mA |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Propagation Delay | 190 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 150 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 30 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 4 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC125D Overview
Logical driver uses a neat 14-SOIC (0.154, 3.90mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74HC series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This logical driver is a member of the HC/UH family. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74HC125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 2/6V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. 4 channels for high quality communication. Wireless transceiver is able to output 4 lines. The typical output current of the logical driver is measured 7.8mA.
SN74HC125D Features
Bus Driver/Transceivers
SN74HC125D Applications
There are a lot of Texas Instruments SN74HC125D Buffers & Transceivers applications.
- Wireless teaching
- 1x/2x Fiber Channel
- Digital systems
- Pocket PC
- Long-distance fiber optic network applications
- Wireless showroom
- Mainframes, workstations or storage devices
- SONET/SDH Network
- AV receiver
- Fiber-to-the-desktop
