Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HC125 |
Pin Count |
14 |
Number of Outputs |
4 |
Qualification Status |
Not Qualified |
Output Type |
3-State |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Channels |
4 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Propagation Delay |
25 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
190 ns |
Family |
HC/UH |
Logic Function |
Buffer, Inverting |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
Buffer, Non-Inverting |
Max I(ol) |
0.006 A |
Number of Bits per Element |
1 |
Prop. Delay@Nom-Sup |
30 ns |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.08mA |
Count Direction |
UNIDIRECTIONAL |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74HC125DT Overview
Logical driver uses a neat 14-SOIC (0.154, 3.90mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74HC series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Transceiver shares the HC/UH family's comprehensive benefits and features. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74HC125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 2/6V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. 4 channels for high quality communication. It is sufficient to make 4 outputs.
SN74HC125DT Features
Bus Driver/Transceivers
SN74HC125DT Applications
There are a lot of Texas Instruments SN74HC125DT Buffers & Transceivers applications.
- Satellite ground stations
- Switches/bridges/routers/servers
- Solenoids
- transmission relay
- Wired telephone
- Televisions
- Wireless transmission
- Wireless teaching
- Transmission stations
- VoIP phones