SN74HC126NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 188 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 150 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 30 ns |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
| Control Type | ENABLE HIGH |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC126NE4 Overview
Logical driver uses a neat PDIP package. Rail/Tube external packaging. All of the 4 elements are put into use. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This buffer driver is part of the HC/UH family of parts. 14 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE HIGH control technology. In quiescent state, the electronic part uses 8μA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 7.8mA to its low level. In high level output mode, the electronic parts may conduct -7.8mA of current. Voltage used to run voltage buffer should be 2V at least. In regard to the maximum supply voltage, buffer driver is rated 6V. It is known as a BUS DRIVER logic IC.
SN74HC126NE4 Features
Bus Driver/Transceivers
High Level Output: 7.8mA
Low Level Output: -7.8mA
BUS DRIVER Logic IC
SN74HC126NE4 Applications
There are a lot of Texas Instruments SN74HC126NE4 Buffers & Transceivers applications.
- Wireless teaching
- TV signal transmission
- Carrier phase observations
- Televisions
- Car alarm systems
- Remote controls
- Cell phones
- Vehicle, ship, aircraft navigation and positioning
- Data center
- Telecom and datacom networking applications
