SN74HC138PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 45 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 225 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| Max I(ol) | 0.004 A |
| High Level Output Current | 5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC138PWG4 Overview
Providing this information in the TSSOP enables digital switch board space to be saved.Rail/Tube represents its packaging.The basic configuration of this system includes 16 terminations.The multiplexer is supplied with 5V voltage.This turn signal switch has 16 component pins.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Single.A total of 16 pins are configured on this board.Multiplexer ics are mounted in the direction of Surface Mount.There is a family of HC/UH members.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.No external influence consumes 8μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.It is possible to accept voltage levels through 3 input lines of multiplexers.As the signal source, there are 8 output lines.85°C is an acceptable maximum temperature for this signal switch.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.The device is specified to operate at the maximum supply voltage of 6V in accordance with its applicable specification.A minimum supply voltage of 2V is specified for the digital swith in accordance with its applicable specifications.In mux switch configuration, there are 1 elements.It uses IC OTHER DECODER/DRIVER for its logic.
SN74HC138PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 5V
3 input lines
8 output lines
OTHER DECODER/DRIVER as the logic IC
SN74HC138PWG4 Applications
There are a lot of Texas Instruments SN74HC138PWG4 Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- Code conversion
- LVDS
- Frequency multiplexing system
- Idle motor
- Transmission from the computer system of a satellite
- Memory system of computers
- PCIe
- Steel plants
- Data distribution
