SN74HC139DE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 44 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 220 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | 5.2mA |
| Low Level Output Current | 5.2mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC139DE4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the SOIC.In this case, it is packaged as Rail/Tube.There is a design for terminating 16 as part of its basic configuration.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 16 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, the supply type is Single.It is configured with 16 pins.The mount is in Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.The multiplexer ic provides 4 bits.The digital switch ic is an electronic part classified into Decoder/Drivers.Without external influences, it consumes 80μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.A signal source has 4 output lines.Signal switch operation at 85°C temperature is acceptable.The minimal operating temperature of the multiplexer should be maintained at -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 6V.Typical device specifications specify a voltage supply of 2V for the digital swith.A configuration element for the mux switch consists of 2 elements.In order to implement its logic, it makes use of IC OTHER DECODER/DRIVER.
SN74HC139DE4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74HC139DE4 Applications
There are a lot of Texas Instruments SN74HC139DE4 Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Recording transmission
- Electronic circuits
- HD surveillance system
- CPU memory location identification
- Communication system
- Data communication
- Automatic Monitoring systems
- Data-routing applications
- Textile mills
