SN74HC139PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 220 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 220 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC139PWRE4 Overview
In order to conserve board space, digital switch is included in the TSSOP.Tape and Reel represents its packaging.The basic configuration of this system includes 16 terminations.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, Single is employed as the supply type.The board has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.In the HC/UH family, the logic switch is included.The part belongs to the Decoder/Drivers category of signal switches.It consumes 80μA current of multiplexer ic without external influences.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.Signal sources consist of output lines of 4.Signal switch operation at 85°C temperature is acceptable.A temperature of the multiplexer of -40°C should be maintained for minimal operation.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 6V.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2V.Configuration elements for the mux switch consist of 2.In order to implement its logic, it makes use of IC OTHER DECODER/DRIVER.
SN74HC139PWRE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74HC139PWRE4 Applications
There are a lot of Texas Instruments SN74HC139PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- RF-based home automation system
- Idle motor
- LVDS
- Video transmission
- Combinational circuit
- GLAN
- Code conversion
- Data-routing applications
- Solenoid cooling fan
