SN74HC139PWRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 220 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 220 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC139PWRG4 Overview
It is included in the TSSOP in order to save board space.The package is in the form of Tape and Reel.This configuration includes 16 terminations as part of its basic functionality.In this case, 5V is the voltage supplied to the multiplexer's system.Currently, this turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.Currently, it is configured with 16 pins.Surface Mount is the way it is mounted.The logic switch is a member of the HC/UH family.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Not being affected by the external factors, consumes 80μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.As the signal source, there are 4 output lines.A maximum temperature of 85°C is acceptable for this signal switch.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 6V.A minimum supply voltage of 2V is required to operate the digital swith.In mux switch configuration, there are 2 elements.A logic IC based on OTHER DECODER/DRIVER is employed in this system.
SN74HC139PWRG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74HC139PWRG4 Applications
There are a lot of Texas Instruments SN74HC139PWRG4 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Data demultiplexing
- Enabling different rows of memory depending on address in memory chips
- Medical industry
- Code converters
- Automatic Monitoring systems
- RF-based home automation system
- Audio transmission
- Code conversion
- Signal router
