banner_page

SN74HC148DWR

16 Terminations2V~6V 16 Pin 74HC148 Signal switch74HC Series 1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC148DWR
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 275
  • Description: 16 Terminations2V~6V 16 Pin 74HC148 Signal switch74HC Series 1 Functions(Kg)

Details

Tags

Parameters
Weight 420.395078mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74HC
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Priority Encoder
Subcategory Arithmetic Circuits
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Base Part Number 74HC148
Pin Count 16
Operating Supply Voltage 5V
Circuit 1 x 8:3
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Number of Bits 8
Propagation Delay 31 ns
Turn On Delay Time 245 ns
Family HC/UH
Current - Output High, Low 5.2mA 5.2mA
Supply Type Single
Output Polarity INVERTED
Number of Input Lines 8
Voltage Supply Source Single Supply
Independent Circuits 1
Number of Output Lines 3
Height Seated (Max) 2.65mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Number of Pins 16

SN74HC148DWR Overview


Due to the fact that it is provided in the 16-SOIC (0.295, 7.50mm Width), digital switch allows the board to be compacted.It is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Priority Encoder.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.As a member of 74HC series, the multiplexers can be used for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.The part number for 74HC148 can be used to find its logic switch related parts as well.In multiplexer's system, 5V is the voltage supplied.There are 16 component pins in this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.The board is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of HC/UH members.There are 8 bits signal multiplexer provides.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.Keeping Vsup at 6V will prevent some unnecessary failures.It is provided that 2/6V has a power supply in order to function normally.In electronic terms, the digital switch ic is classified as Arithmetic Circuits.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The multiplexers have 8 input lines used to accept voltage levels.As the signal source, there are 3 output lines.

SN74HC148DWR Features


Supplied in the 16-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
Operating with the supply voltage of 5V
8 input lines
3 output lines

SN74HC148DWR Applications


There are a lot of Texas Instruments SN74HC148DWR Signal Switches / Multiplexers / Decoders applications.

  • Communication system
  • To select different devices in microprocessor input
  • Seven segment displays
  • Implementing boolean functions with multiple variables
  • Microprocessor memory systems
  • To select different devices in microprocessor output
  • Time division multiplexing system
  • Make half adder
  • Data bus control
  • Night vision cameras

Write a review

Note: HTML is not translated!
    Bad           Good