SN74HC151D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 275 ns |
| Family | HC |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Prop. Delay@Nom-Sup | 63 ns |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC151D Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.It is packaged in the way of Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 2V~6V voltage.These multiplexers are members of the 74HC series, which provide extensive application potential.It is designed with 16 terminations as part of its basic configuration.There is a base part number 74HC151 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch object belongs to the family of HC.Signal multiplexer contains 8 bits.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.mux switch's normal operation requires the power supply of 2/6V.As a result, the turn signal switch consists of 1 outputs.In the absence of external influences, it consumes 8μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.This multiplexer provides 8 inputs.1 circuits are formed for the normal operation of the digitalswitch.
SN74HC151D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
Operating with the supply voltage of 5V
SN74HC151D Applications
There are a lot of Texas Instruments SN74HC151D Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- Data collection system
- Idle motor
- Electronic circuits
- Home automation system
- Combinational circuit
- Make full adder
- Small scale TV wall
- Frequency multiplexing system
- Decimal decoder
