SN74HC151PW
| Parameters | |
|---|---|
| Bandwidth | 28MHz |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 63 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 47 ns |
| Family | HC |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
SN74HC151PW Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the Surface Mount method .Multiplexer is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 2V~6V, designers have superior flexibility.Several applications are possible for 74HC series multiplexers.The basic configuration of this system includes 16 terminations.There is a base part number of 74HC151 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has a total of 16 component pins.As a result, GULL WING represents the end of the conductors.There is a supply type of Single employed as part of this supply.This multiplexer ic has 16 pins configured.The mounting point is Surface Mount.The logic switch is a member of the family of HC.In the signal multiplexer, there are 8 bits available.Vsup should be kept at 2V to prevent some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.In order for 2/6V to operate normally, a power supply is provided.For the turn signal switch's operation, there are 1 outputs.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The multiplexer provides 8 inputs.
SN74HC151PW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
Operating with the supply voltage of 5V
SN74HC151PW Applications
There are a lot of Texas Instruments SN74HC151PW Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- CPU memory location identification
- A/D converters
- Recording transmission
- Video transmission
- Electronically controlled engine system
- Data communication
- Memory chips
- Automation system
- RF-based home automation system
