banner_page

SN74HC151PWT

16 Terminations2V~6V 16 Pin 74HC151 Signal switch74HC Series 1 Outputs1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC151PWT
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 805
  • Description: 16 Terminations2V~6V 16 Pin 74HC151 Signal switch74HC Series 1 Outputs1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Termination SMD/SMT
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74HC151
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 1 x 8:1
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Bits 8
Propagation Delay 47 ns
Family HC
Number of Inputs 8
Current - Output High, Low 7.8mA 7.8mA
Supply Type Single
Bandwidth 28MHz
Output Polarity COMPLEMENTARY
Prop. Delay@Nom-Sup 63 ns
Voltage Supply Source Single Supply
Independent Circuits 1
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC151PWT Overview


In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.Among its basic features are 16 terminations.You can also find related parts by using its logic switch base part number of 74HC151.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 16 component pins.As the end of conductors, it uses GULL WING.The supply type of this multiplexer ic is Single.Currently, it is configured with 16 pins.This unit is mounted in the way of Surface Mount.The logic switch is a member of the HC family.Signal multiplexer contains 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.During mux switch's normal operation, 2/6V is provided with a power supply.In order for the turn signal switch to work, there are 1 outputs.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.This multiplexer has 8 inputs.The switches is packaged according to the way of TR.

SN74HC151PWT Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
Operating with the supply voltage of 5V

SN74HC151PWT Applications


There are a lot of Texas Instruments SN74HC151PWT Signal Switches / Multiplexers / Decoders applications.

  • Video transmission
  • Data demultiplexing
  • Data-routing applications
  • VGA
  • Make half adder
  • Telephone network
  • Enabling different rows of memory depending on address in memory chips
  • Transmission from the computer system of a satellite
  • Decimal decoder
  • Electronically controlled engine system

Write a review

Note: HTML is not translated!
    Bad           Good