SN74HC151QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 33 ns |
| Family | HC/UH |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 73 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC151QDRQ1 Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.As long as the operating temperature is -40°C~125°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.Multiplexers of the Automotive, AEC-Q100, 74HC series can be used in a wide range of applications.Among its basic configurations are 16 terminations.The part number for 74HC151 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has 16 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, Single is employed as the supply type.The board has 16 pins configured.Surface Mount is the way it is mounted.In the HC/UH family, the logic switch is included.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.In order to maintain mux switch's normal operation, power is provided to 2/6V.As part of the operation of this turn signal switch, there are 1 outputs.In this multiplexer, there is a total of 8 inputs.The switches packaging is based on TR.
SN74HC151QDRQ1 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
SN74HC151QDRQ1 Applications
There are a lot of Texas Instruments SN74HC151QDRQ1 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Paper plants
- Encrypted communications system
- HD surveillance system
- Analog to digital conversion
- Speed synchronization of multiple motors in industries
- Telephone network
- Enabling block of memory depending on address in memory chips
- Data bus control
- Small scale TV wall
