SN74HC153D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Power Dissipation | 320mW |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 38 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 220 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC153D Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.With the 74HC series, the multiplexers are suitable for a diverse range of applications.The basic configuration of this system includes 16 terminations.There is a base part number of 74HC153 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.A component pin count of 16 is found on this turn signal switch.GULL WING represents the end of conductors.This supply type employs Single.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of HC/UH the logic switch is a member.In the signal multiplexer, there are 4 bits available.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The turn signal switch contains 1 outputs designed to operate.Without any external influences, it consumes 8μA current of multiplexer ic at all times.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.There are 8 inputs provided in this multiplexer.For transmission, there are 2 channels in the turn signal switch's circuit.
SN74HC153D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC153D Applications
There are a lot of Texas Instruments SN74HC153D Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- Data collection system
- Combinational circuit
- Implementing boolean functions with multiple variables
- Home automation system
- Communication system
- CNC machines
- Steel plants
- Decimal decoder
- Analog to digital conversion
