SN74HC153DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 38 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC153DR Overview
Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.The package is in the form of Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.Multiplexers from the 74HC series can be used in a wide range of applications.There are 16 terminations included in its basic configuration.As its base part number is 74HC153, logic switch can also be used to find its related parts.In multiplexer's system, 5V is the voltage supplied.There are 16 component pins in this turn signal switch.As a result, conductors end at GULL WING.There is a type of supply of Single.A configuration of 16 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.The multiplexer ic provides 4 bits.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The turn signal switch has 1 outputs designed for operation.Using a supply voltage of 5V can result in reliable performance of the multiplexers.This multiplexer has a total of 8 inputs.The signal switching is packaged by TR. This turn signal switch's circuit uses 2 transmission channels.
SN74HC153DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC153DR Applications
There are a lot of Texas Instruments SN74HC153DR Signal Switches / Multiplexers / Decoders applications.
- Automation system
- HD surveillance system
- Decimal decoder
- Automatic Monitoring systems
- GLAN
- Idle motor
- Recording transmission
- Solenoid cooling fan
- Frequency multiplexing system
- A robotic vehicle with the metal detector
