SN74HC153DRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 38 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC153DRE4 Overview
As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.The basic configuration includes 16 terminations.The part number for 74HC153 can be used to find its logic switch related parts as well.The turn signal switch is supplied with a voltage of 5V volts.Signal switch has 16 component pins.It employs GULL WING as the point at which conductors come to an end.This supply type employs Single.This multiplexer ic has 16 pins configured.The mounting point is Surface Mount.The HC/UH family includes the logic switch.As a result, signal multiplexer provides 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.As a result, the turn signal switch consists of 1 outputs.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.It has 8 inputs.The switches package is packaged in a way which is consistent with TR.The turn signal switch's circuit consists of 2 transmission channels.
SN74HC153DRE4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC153DRE4 Applications
There are a lot of Texas Instruments SN74HC153DRE4 Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Code converters
- Electronics industry
- Make half adder
- Recording transmission
- Speed control of medern motors
- Medium scale TV wall
- War field flying robot with a night vision flying camera
- Robotic vehicles
- Time division multiplexing system
