Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
74HC153 |
Pin Count |
16 |
Number of Outputs |
1 |
Operating Supply Voltage |
5V |
Circuit |
2 x 4:1 |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Channels |
2 |
Number of Bits |
4 |
Propagation Delay |
38 ns |
Family |
HC/UH |
Number of Inputs |
8 |
Current - Output High, Low |
7.8mA 7.8mA |
Supply Type |
Single |
Bandwidth |
28MHz |
Output Polarity |
TRUE |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74HC153DRG4 Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.The multiplexers from 74HC series can be used for a wide range of applications.The basic configuration includes 16 terminations.The base part number is 74HC153, which is also useful when looking up signal switch's related components.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch contains 16 component pins.As the end of conductors, it uses GULL WING.There is a type of supply Single that is employed in this case.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.As a result, signal multiplexer provides a total of 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.Avoid unnecessary failures by keeping Vsup at 6V.As part of the operation of this turn signal switch, there are 1 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer has 8 inputs.In accordance with TR, switches can be packaged.The turn signal switch's circuit has 2 transmission channels.
SN74HC153DRG4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC153DRG4 Applications
There are a lot of Texas Instruments SN74HC153DRG4 Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Electronically controlled engine system
- Decimal decoder
- Idle motor
- D/A converters
- Medical industry
- Image transmission
- Arithmetic Logic Units
- Automatic health monitoring systems
- Make half adder