SN74HC153N
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Power Dissipation | 320mW |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 38 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
SN74HC153N Overview
In order to conserve board space, digital switch is included in the 16-DIP (0.300, 7.62mm).In this case, it is packaged as Tube.The method digital switch ic adopts for mounting is Through Hole.As the analog part, the circuit uses an analog IC Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74HC series, which provide extensive application potential.Among its basic configurations are 16 terminations.The base part number is 74HC153, which is also useful when looking up signal switch's related components.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch consists of 16 component pins.Its supply type is Single, which is used as the source of power.A configuration of 16 pins is used.The mounting is in the way of Through Hole.There is a family of HC/UH members.In the signal multiplexer, there are 4 bits available.Keep Vsup at 2V to avoid unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The turn signal switch operates with 1 outputs.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.This multiplexer has a total of 8 inputs.For transmission, there are 2 channels in the turn signal switch's circuit.
SN74HC153N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC153N Applications
There are a lot of Texas Instruments SN74HC153N Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- To select different task for memory in microprocessor memory systems
- Data-routing applications
- Code converters
- RF-based home automation system
- Electronics industry
- Paper plants
- Make full adder
- Enabling different functions units in microprocessor instruction decoding
- Injectors
