SN74HC153PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 38 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC153PW Overview
Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged in the way of Tube.Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Multiplexer is used.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~6V.provides digital controlled switch's digital controlled switch'sSince they are members of the 74HC series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.Its logic switch base part number is 74HC153 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Single is employed.Currently, it is configured with a 16 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of HC/UH the logic switch is a member.As a result, signal multiplexer provides 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The turn signal switch operates with 1 outputs.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.A multiplexer such as this has 8 inputs available.There are a total of 2 channels used for transmitting data in the turn signal switch's circuit.
SN74HC153PW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC153PW Applications
There are a lot of Texas Instruments SN74HC153PW Signal Switches / Multiplexers / Decoders applications.
- Data distribution
- Steel plants
- Microprocessor input/output systems
- Speed control of medern motors
- Enabling different functions units in microprocessor instruction decoding
- Image transmission
- Enabling different rows of memory depending on address in memory chips
- A robotic vehicle with the metal detector
- Textile mills
- Electronics industry
