SN74HC153PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 38 ns |
| Family | HC/UH |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 35 ns |
| High Level Output Current | 7.8mA |
| Low Level Output Current | 7.8mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 1 |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC153PWG4 Overview
Providing this information in the TSSOP enables digital switch board space to be saved.There is a design for terminating 16 as part of its basic configuration.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch contains 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.In the HC/UH family, the logic switch is included.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.In this multiplexer, there is a total of 8 inputs.The switches package is packaged in accordance with the TUBE method.To accept voltage levels, the multiplexers have4 input lines.Signal sources consist of output lines of 1.Transmission is carried out over 2 channels in the turn signal switch's circuit.The maximum operating temperature of 85°C is acceptable for this signal switch.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.Device specifications specify 6V as the maximum supply voltage for the signal switches.A minimum supply voltage of 2V is required to operate the digital swith.
SN74HC153PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 5V
4 input lines
1 output lines
SN74HC153PWG4 Applications
There are a lot of Texas Instruments SN74HC153PWG4 Signal Switches / Multiplexers / Decoders applications.
- PCIe
- RF-based home automation system
- Automatic Monitoring systems
- Relay
- Make full adder
- Combinational circuit
- Data collection system
- Robotic vehicles
- Paper plants
- Speed control of medern motors
