SN74HC153PWR
| Parameters | |
|---|---|
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 38 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
SN74HC153PWR Overview
As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Since they are members of the 74HC series, they can be used in a wide variety of applications.The basic configuration of this system includes 16 terminations.There is a base part number 74HC153 that can be used to locate signal switch's related components as well.The multiplexer's system works with 5V voltage.Signal switch has 16 component pins.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Single.The board is configured with 16 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the HC/UH family.Signal multiplexer contains 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.This turn signal switch has 1 outputs designed for its operation.Supply voltages of 5V can provide reliable performance of the multiplexers.It has 8 inputs.The switches packaging is based on TR.This turn signal switch's circuit uses 2 transmission channels.
SN74HC153PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC153PWR Applications
There are a lot of Texas Instruments SN74HC153PWR Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Signal router
- Microprocessor memory systems
- Code converters
- Data transfer
- CPU memory location identification
- Night vision cameras
- Analog to digital conversion
- Image transmission
- Make half adder
