SN74HC157D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 32 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC157D Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tube.Surface Mount is the mounting method digital switch ic uses.Multiplexer is the analog IC that the multiplexers uses.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.With the 74HC series, the multiplexers are suitable for a diverse range of applications.There are 16 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 74HC157.The multiplexer's system is powered by 5V voltage.This turn signal switch has 16 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.A configuration of 16 pins is used.This unit is mounted in the way of Surface Mount.The logic switch is a member of the HC/UH family.In the signal multiplexer, there are 2 bits available.Vsup should be kept at 2V to prevent some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.This turn signal switch has 1 outputs designed for its operation.It consumes 8μA current of multiplexer ic since it is not affected by external factors.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 8 inputs.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
SN74HC157D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC157D Applications
There are a lot of Texas Instruments SN74HC157D Signal Switches / Multiplexers / Decoders applications.
- Logic circuits
- Electronically controlled engine system
- Code converters
- Speed control of medern motors
- Time division multiplexing system
- To select different devices in microprocessor input
- Idle motor
- Decimal decoder
- Image transmission
- Combinational circuit
