SN74HC157PWT
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 33 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
SN74HC157PWT Overview
Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74HC series are suitable for a wide range of applications.Among its basic features are 16 terminations.The base part number is 74HC157, which is also useful when looking up signal switch's related components.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has 16 component pins.Conductors terminate at GULL WING in this design.There is a type of supply Single that is employed in this case.A configuration of 16 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.In this signal multiplexer, there are 2 bits that are provided.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.The maximal supply voltage (Vsup) should be kept at 6V to avoid some unnecessary failures.The turn signal switch contains 1 outputs designed to operate.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.There are 8 inputs provided in this multiplexer.TR is used to package the switches.A total of 4 channels are used for transmission in the turn signal switch's circuit.
SN74HC157PWT Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC157PWT Applications
There are a lot of Texas Instruments SN74HC157PWT Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- Memory system of computers
- Microprocessor instruction decoding
- HD surveillance system
- Combinational circuit
- Textile mills
- VGA
- PCIe
- Speed control of medern motors
- LVDS
