banner_page

SN74HC158D

16 Terminations2V~6V 16 Pin 74HC158 Signal switch74HC Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC158D
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 404
  • Description: 16 Terminations2V~6V 16 Pin 74HC158 Signal switch74HC Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number 74HC158
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Channels 4
Number of Bits 2
Throw Configuration DPST
Propagation Delay 32 ns
Family HC/UH
Number of Inputs 8
Current - Output High, Low 7.8mA 7.8mA
Supply Type Single
Bandwidth 28MHz
Output Polarity INVERTED
Voltage Supply Source Single Supply
Independent Circuits 1
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC158D Overview


Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.It is packaged according to the Tube method.For mounting, digital switch ic uses the method Surface Mount.Multiplexer is the analog IC that the multiplexers uses.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.These multiplexers are members of the 74HC series, which provide extensive application potential.This configuration includes 16 terminations as part of its basic functionality.There is a base part number 74HC158 that can be used to locate signal switch's related components as well.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.This multiplexer ic is configured with 16 pins.The mount is in Surface Mount.The logic switch object belongs to the family of HC/UH.There are 2 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.Keeping Vsup at 6V will prevent some unnecessary failures.As part of the operation of this turn signal switch, there are 1 outputs.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This multiplexer is equipped with 8 inputs and 8 outputs.A total of 4 transmission channels are available in the turn signal switch's circuit.

SN74HC158D Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

SN74HC158D Applications


There are a lot of Texas Instruments SN74HC158D Signal Switches / Multiplexers / Decoders applications.

  • GLAN
  • RF-based home automation system
  • Night vision cameras
  • Communication system
  • Data communication
  • Electronics industry
  • Microprocessor input/output systems
  • War field flying robot with a night vision flying camera
  • VGA
  • Time division multiplexing system

Write a review

Note: HTML is not translated!
    Bad           Good