SN74HC158NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 33 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | INVERTED |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC158NSR Overview
Due to the fact that it is provided in the 16-SOIC (0.209, 5.30mm Width), digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74HC series, which provide extensive application potential.There is a design for terminating 16 as part of its basic configuration.Its logic switch base part number is 74HC158 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.A conductor terminates at GULL WING.There is a type of supply of Single.There are 16 pins on it.This unit is mounted in the way of Surface Mount.The logic switch is a member of the HC/UH family.There are 2 bits in signal multiplexer.Vsup should be kept at 2V to prevent some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.As a result, the turn signal switch consists of 1 outputs.Using a supply voltage of 5V can result in reliable performance of the multiplexers.In this multiplexer, there is a total of 8 inputs.TR is used to package the switches.This turn signal switch's circuit uses 4 transmission channels.
SN74HC158NSR Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC158NSR Applications
There are a lot of Texas Instruments SN74HC158NSR Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Make full adder
- Home automation system
- Data collection system
- HD surveillance system
- War field flying robot with a night vision flying camera
- Medium scale TV wall
- Data communication
- Data transfer
- Combinational circuit
