SN74HC161DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | RCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Base Part Number | 74HC161 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 275 ns |
| Turn On Delay Time | 275 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC161DR Overview
The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. In order to configure it, it uses 16terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. The device contains 1terminations. There are 16pins on all components. As [0], it is packaged. In the circuit, there are 16pins that connect other components. To mount it, use the method of [0]. In this case, it appears as a member of the family [0]. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. It is assumed that the logic type is [0]. It is recommended to set the operating temperature to -40°C~85°C. It adopts a mounting type of Surface Mount. When a supply voltage of 2V~6Vis provided, it can operate with greater reliability. The array contains elements containing 4bits each. The result may be yesin terms of Pbfree code. Among the features of this electronic device, RCO OUTPUTare essential. Under its base part number of [0], you will find additional related parts. TR is employed for its packing. The voltage source produces 2/6Vvoltage. In order for it to operate, it requires a supply voltage of 5V . There is 2V minimum supply voltage (Vsup) for this device. 44MHzis the frequency of operation. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts.
SN74HC161DR Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC161DR Applications
There are a lot of Texas Instruments SN74HC161DR Counters & Dividers applications.
- Signal gating
- POWER COMPUTATION
- Counter control/timers
- Frequency dividers
- Time delay circuits
- Programmable decade counters
- Dual Up Counters
- VHF, UHF, FM, AM, etc.
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- LINEARIZATION
