SN74HC161DT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC161 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 275 ns |
| Turn On Delay Time | 275 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC161DT Overview
A device of this type is supplied in a package of type [0]. This configuration uses 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. There are 1 terminations on the device. 16is the number of pins on all components. As a result, it is packaged as Tape & Reel (TR). As part of the circuit, there are 16pins used to connect other components. Using [0], it can be mounted. In this case, it belongs to the family of [0]. As a member of 74HC series, it is well suited for various applications. In this case, the logic type is set to [0]. A temperature of -40°C~85°Cshould be set for the operating environment. The mounting type is Surface Mount. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. It contains 4elements. Based on Pbfree code, this may result in yes. An important feature of this electronic device is [0]. Further related parts can be found under its base part number 74HC161. It is packed using [0]. In this case, 2/6Vvoltage is generated by the voltage source. The device requires a supply voltage of [0]. There is 2V minimum supply voltage (Vsup) for this device. In this case, the frequency is 44MHz Hz. Typically, the supply voltage (Vsup) is limited to 6V.
SN74HC161DT Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC161DT Applications
There are a lot of Texas Instruments SN74HC161DT Counters & Dividers applications.
- VHF, UHF, FM, AM, etc.
- Time-delay circuits
- Binary counter/decoder
- Counter control/timers
- TRUE RMS-TO-DC CONVERSION
- Digital multiplexing and demultiplexing
- Decade counter/decimal decode display (CD4017B）
- ALGEBRAIC COMPUTATION
- Control counters
- Frequency dividers
