SN74HC161NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC161 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 255 ns |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Timing | Synchronous |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC161NSR Overview
It is a device supplied in the 16-SOIC (0.209, 5.30mm Width) package. For its configuration, 16terminations are used. This device is fully flexible due to the supply voltage of [0]. The device contains 1terminations. A total of 16pins are available on all components. It is packaged in a manner consistent with Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. The way of Surface Mount is used to mount it. It is included in the HC/UHfamily. As a member of the 74HCseries, it is ideal for a wide range of applications. A logic type of Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. When the supply voltage is set to [0], it is able to operate with greater reliability. The array contains elements containing 4bits each. Using the Pbfree code, the result may be yes. These electronic devices have many important features, and RCO OUTPUTis one of them. There are more related parts under the 74HC161base part number. The packing of this product is performed by [0]. To operate, it requires a supply voltage of 6V volts. Supply voltage (Vsup) can be as low as 2V. There is 44MHz frequency associated with it. It is possible to reach a maximum supply voltage of 6VV (Vsup).
SN74HC161NSR Features
Embedded in the 16-SOIC (0.209, 5.30mm Width) package
4 bits per element
RCO OUTPUT
Operating supply voltage of 6V
Frequency of 44MHz
SN74HC161NSR Applications
There are a lot of Texas Instruments SN74HC161NSR Counters & Dividers applications.
- Signal gating
- Binary counter/decoder
- Timers
- Fixed and programmable counters greater than 10
- POWER COMPUTATION
- SQUARING
- Time delay circuits
- VHF, UHF, FM, AM, etc.
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Programmable decade counters
