SN74HC161PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RCO OUTPUT |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 44MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 275 ns |
| Turn On Delay Time | 275 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Unidirectional |
| Sync/Async | Synchronous |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC161PWE4 Overview
This device is supplied in the TSSOP package. Using 16terminations, it can be configured. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. The 1elements are connected by wires. In total, there are 16pins on the component. To connect the circuit's other components, there are 16pins. The way of Surface Mount is used to mount it. It is included in the HC/UHfamily. The are 4 bits information in the device. The result may be yesin terms of Pbfree code. These electronic devices have many important features, and RCO OUTPUTis one of them. There is a temperature grade of INDUSTRIALon this device. It is packed with [0]. For the device to operate, a voltage supply of 5Vis required. It operates at the maximum temperature of 85°C for extended periods of time with acceptable stability of its electrical characteristics. It operates over a specified temperature range with a lower limit generally set to -40°C. It operates with the frequency of 44MHz. There is a maximum voltage available for the device of 6V. It is possible to supply the device with a voltage as low as 2V.
SN74HC161PWE4 Features
Embedded in the TSSOP package
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC161PWE4 Applications
There are a lot of Texas Instruments SN74HC161PWE4 Counters & Dividers applications.
- Timing applications
- Control counters
- Decade counter/decimal decode display (CD4017B）
- Signal gating
- Communications Digital Frequency Synthesizers;
- Up Counters
- Fixed or Programmable Frequency Division
- Programmable binary and decade
- Binary counter/decoder
- Divide-by-N counting
