SN74HC161PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | RCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC161 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 275 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC161PWR Overview
This device is supplied in the 16-TSSOP (0.173, 4.40mm Width) package. 16 terminations are used for its configuration. The supply voltage of 5V enables it operate in a fully flexible way. 1 elements are interconnected in wires. There are 16pins on all components. Packaging is based on Tape & Reel (TR). As part of the circuit, there are 16pins used to connect other components. It is mounted in the direction of [0]. The HC/UHfamily is derived from it. As a member of 74HC series, it is well suited for various applications. Logic type Binary Counter is adopted. -40°C~85°Cis the recommended operating temperature. Having a mounting type of [0], it is suitable for installation. When the supply voltage is set to [0], it is able to operate with greater reliability. The array consists of elements storing 4bits each. Using the Pbfree code, the result may be yes. In regard to this electronic device, RCO OUTPUTare essential features. You can find more related parts under its base part number of 74HC161. The packing of this product is performed by [0]. From the voltage source, there is a voltage of 2/6V volts. To operate, the device requires a voltage of [0]. The minimum supply voltage (Vsup) is 2V. Frequency 44MHzdetermines its operation. Typically, the supply voltage (Vsup) is limited to 6V.
SN74HC161PWR Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC161PWR Applications
There are a lot of Texas Instruments SN74HC161PWR Counters & Dividers applications.
- Counter control/timers
- Clocks
- Decade counter/decimal decode display (CD4017B）
- Up Counters
- ALGEBRAIC COMPUTATION
- Time Out Timer for Consumer-Application Industrial Controls
- Programmable binary and decade
- Frequency division
- DIVISION
- Frequency dividing circuits
