SN74HC161PWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC161 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 275 ns |
| Turn On Delay Time | 275 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC161PWT Overview
This device is supplied in the 16-TSSOP (0.173, 4.40mm Width) package. This configuration uses 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The 1elements are connected by wires. A total of 16pins are available on all components. Packaging is based on Tape & Reel (TR). A circuit is connected to other components by 16pins. It is mounted in the direction of [0]. In this case, it belongs to the family of [0]. The 74HCseries offers a wide range of applications due to its versatility. In this case, the logic type is set to [0]. In this case, the operating temperature should be set to -40°C~85°C. It adopts a mounting type of Surface Mount. By providing the supply voltage of [0], it is capable of operating more reliably. There are 4 bits stored in each element of the array. The result may be yesin terms of Pbfree code. It is important to note that in regards to this electronic device, RCO OUTPUTis an extremely significant feature. The base part number of 74HC161provides access to more related parts. The packing of the product is carried out by [0]. There is 2/6V voltage comes from the voltage source. The device operates on voltage [0]. As low as 2V Vsup is the minimum supply voltage. With a frequency of [0], it operates. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts.
SN74HC161PWT Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC161PWT Applications
There are a lot of Texas Instruments SN74HC161PWT Counters & Dividers applications.
- Frequency division
- DIVISION
- SQUARING
- Frequency dividers
- Fixed and programmable counters greater than 10
- VHF, UHF, FM, AM, etc.
- Binary counter/decoder
- ALGEBRAIC COMPUTATION
- Dual Up Counters
- Time-delay circuits
