SN74HC163D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Base Part Number | 74HC163 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 270 ns |
| Turn On Delay Time | 270 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC163D Overview
This device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. Using 16terminations, it can be configured. Having a voltage supply of 5Vallows it to operate in a highly flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 16. As a result, it is packaged as Tube. Circuit components are connected by 16pins. It is mounted in the direction of [0]. Initially, it appears to belong to the HC/UH family. With its 74HCseries designation, it can be used for a range of applications. Binary Counteris used as the logic type. Ideally, the operating temperature should be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. When the supply voltage is set to [0], it is able to operate with greater reliability. There is information in the device in the form of 4bits. Pbfree code may produce the result yes. It is important to note that in regards to this electronic device, RCO OUTPUTis an extremely significant feature. It should be noted that there are more related parts under the 74HC163base part number. The voltage source produces a voltage of 2/6V volts. For the device to operate, a voltage supply of 5Vis required. As low as 2V Vsup is the minimum supply voltage. A frequency of 44MHzis used for operation. It is possible to reach a maximum supply voltage of 6VV (Vsup). As a standard feature, it has a 4circuit design.
SN74HC163D Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC163D Applications
There are a lot of Texas Instruments SN74HC163D Counters & Dividers applications.
- Programmable decade counters
- Time Out Timer for Consumer-Application Industrial Controls
- ALGEBRAIC COMPUTATION
- Timing applications
- Digital multiplexing and demultiplexing
- counting/frequency sy nthesizers-BCD output
- SQUARING
- Decade counter/decimal decode display (CD4017B）
- Fixed or Programmable Frequency Division
- Divide-by-N counting
