SN74HC163DRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC163 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 270 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC163DRE4 Overview
This is a device supplied in the 16-SOIC (0.154, 3.90mm Width) package. In order to configure it, it uses 16terminations. 5Vis fully flexible due to its voltage supply. In this diagram, there are 1elements that are interconnected by wires. A total of 16pins are present on all components. As a result, it is packaged in the way of a Tape & Reel (TR). Circuit components are connected with 16pins. Using [0], it can be mounted. It is included in the HC/UHfamily. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. A logic type of Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~85°C. In this case, it is mounted with a Surface Mounttype. Providing a voltage of 2V~6Vensures higher reliability of operation. An array consists of 4bits for each element. Based on the Pbfree code, the result may be yes. It is important to note that RCO OUTPUTare really important features of this electronic device. Further related parts can be found under its base part number 74HC163. It is packed by [0]. The voltage source generates 2/6Vvoltage. To operate, the device requires a voltage of [0]. As low as 2V Vsup is the minimum supply voltage. Frequency 44MHzdetermines its operation. It is possible to provide a voltage up to 6V (Vsup).
SN74HC163DRE4 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC163DRE4 Applications
There are a lot of Texas Instruments SN74HC163DRE4 Counters & Dividers applications.
- Signal gating
- VHF, UHF, FM, AM, etc.
- ALGEBRAIC COMPUTATION
- Decade counter/decimal decode display (CD4017B）
- Divide-by"N" counters/frequency synthesizers
- SQUARE ROOT
- POWER COMPUTATION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Binary counter/decoder
- Counter control/timers
