SN74HC163N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Base Part Number | 74HC163 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 270 ns |
| Turn On Delay Time | 270 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC163N Overview
A 16-DIP (0.300, 7.62mm)package is used for this device. It is configured using 16terminations. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. The device contains 1terminations. All component pins are equal to 16. As [0], it is packaged. To connect the circuit's other components, there are 16pins. It is mounted in the direction of [0]. It is included in the HC/UHfamily. Due to its membership in the 74HCseries, it is suitable for a variety of applications. A logic type of Binary Counter is adopted. In this case, the operating temperature should be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. In the case of a supply voltage of [0], it operates more reliably. The device stores 4bits of information. When it comes to this electronic device, RCO OUTPUT are much important features. Further related parts may be found under the base part number 74HC163. The voltage source generates 2/6Vvoltage. The device operates on a supply voltage of [0]. Supply voltage (Vsup) can be as low as 2V. In this case, the frequency is 44MHz Hz. Typically, the supply voltage (Vsup) is limited to 6V. In order to operate normally, it is designed with circuits with 4values.
SN74HC163N Features
Embedded in the 16-DIP (0.300, 7.62mm) package
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC163N Applications
There are a lot of Texas Instruments SN74HC163N Counters & Dividers applications.
- Timers
- Dual Up Counters
- POWER COMPUTATION
- Clocks
- VHF, UHF, FM, AM, etc.
- Time Out Timer for Consumer-Application Industrial Controls
- Decade counter/decimal decode display (CD4017B）
- ALGEBRAIC COMPUTATION
- Digital multiplexing and demultiplexing
- ANALOG SIGNAL PROCESSING
