SN74HC163NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RCO OUTPUT |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 270 ns |
| Turn On Delay Time | 270 ns |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Unidirectional |
| Sync/Async | Synchronous |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Load/Preset Input | YES |
| Height | 1.95mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC163NSRG4 Overview
This device is packaged in a SOP package. In order to configure it, it uses 16terminations. The supply voltage of 5V permits it to operate with full flexibility. 1 elements are interconnected in wires. There are 16pins on all components. In the circuit, 16pins are used to connect other components. To mount it, use the method of [0]. In this case, it appears as a member of the family [0]. In the device, the information consists of 4 bits. As far as Pbfree code is concerned, the result may be yes. This electronic device is equipped with the following features [0]. The device has a temperature grade of INDUSTRIAL. The packing of this product is performed by [0]. To operate, the device requires a voltage of [0]. The device operates at 85°Cfor extended periods with acceptable stability of electrical characteristics. It operates within a specified temperature range, with the lower limit typically set at -40°C degrees Celsius. A frequency of 44MHzis used for operation. A maximum voltage of 6Vcan be reached by the device. The device can operate at as low a voltage as 2V.
SN74HC163NSRG4 Features
Embedded in the SOP package
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC163NSRG4 Applications
There are a lot of Texas Instruments SN74HC163NSRG4 Counters & Dividers applications.
- ALGEBRAIC COMPUTATION
- Fixed or Programmable Frequency Division
- TRUE RMS-TO-DC CONVERSION
- Timers
- Up Counters
- LINEARIZATION
- Timing applications
- MULTIPLICATION
- Decade counter/decimal decode display (CD4017B）
- Frequency division
