SN74HC163PWR
| Parameters | |
|---|---|
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Base Part Number | 74HC163 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 270 ns |
| Turn On Delay Time | 270 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
SN74HC163PWR Overview
A 16-TSSOP (0.173, 4.40mm Width)package is used for this device. 16 terminations are used for its configuration. The supply voltage of 5V enables it operate in a fully flexible way. In this diagram, there are 1elements that are interconnected by wires. A total of 16pins are available on all components. As a result, it is packaged in the way of a Tape & Reel (TR). As part of the circuit, there are 16pins used to connect other components. It is mounted in the way of [0]. In this case, it appears as a member of the HC/UH family. As a member of 74HC series, it is well suited for various applications. It is assumed that the logic type is [0]. A temperature of -40°C~85°Cshould be set for the operating environment. Mounting type Surface Mountis used. When a supply voltage of 2V~6Vis provided, it can operate with greater reliability. Each element in the array stores 4 bits. In terms of Pbfree code, the result may be yes. In terms of this electronic device, the features provided by RCO OUTPUTare of the utmost importance. Its base part number, [0], contains more related parts. It is packed with [0]. In this case, there is 2/6V voltage coming from the voltage source. To operate, the device requires a voltage of [0]. Supply voltage (Vsup) can be as low as 2V. It operates with the frequency of 44MHz. Up to a maximum voltage of 6Vcan be supplied (Vsup).
SN74HC163PWR Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC163PWR Applications
There are a lot of Texas Instruments SN74HC163PWR Counters & Dividers applications.
- Time Out Timer for Consumer-Application Industrial Controls
- DIVISION
- ANALOG SIGNAL PROCESSING
- Binary counter/decoder
- Control counters
- LINEARIZATION
- Communications Digital Frequency Synthesizers;
- Signal gating
- Divide-by"N" counters/frequency synthesizers
- Frequency dividers
