SN74HC163PWT
| Parameters | |
|---|---|
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 44MHz |
| Base Part Number | 74HC163 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 270 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 36MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT |
SN74HC163PWT Overview
The device is packaged in the 16-TSSOP (0.173, 4.40mm Width)type. In order to configure it, it uses 16terminations. 5Vis fully flexible due to its voltage supply. In wires, 1elements are connected. All component pins are equal to 16. In this case, it is packaged as Tape & Reel (TR). Circuit components are connected with 16pins. It is mounted using the way of [0]. It is included in the HC/UHfamily. Due to its membership in the 74HCseries, it is suitable for a variety of applications. Binary Counteris adopted as the logic type. Ideally, the operating temperature should be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. In the presence of the supply voltage of [0], it can operate more reliably. The array consists of elements storing 4bits each. The result may be yesin terms of Pbfree code. An important feature of this electronic device is [0]. More related parts are available under its base part number 74HC163. It is packed by [0]. From the voltage source, there is a voltage of 2/6V volts. The device operates on voltage [0]. Supply voltages can be as low as 2V volts (Vsup). It operates with the frequency of 44MHz. There is 6V maximum supply voltage (Vsup) allowed.
SN74HC163PWT Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
RCO OUTPUT
Operating supply voltage of 5V
Frequency of 44MHz
SN74HC163PWT Applications
There are a lot of Texas Instruments SN74HC163PWT Counters & Dividers applications.
- Decade counter/decimal decode display (CD4017B）
- MULTIPLICATION
- Time delay circuits
- Timing applications
- Frequency division
- Binary counter/decoder
- Control counters
- Counter control/timers
- TRUE RMS-TO-DC CONVERSION
- DIVISION
