SN74HC174DR
| Parameters | |
|---|---|
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 160 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 14ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 40 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 3 |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
SN74HC174DR Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. D flip flop is embedded in the Cut Tape (CT) package. This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74HCseries contain this type of chip. You should not exceed 50MHzin the output frequency of the device. A total of 1elements are contained within it. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74HC174. It is powered by a voltage of 5V . A JK flip flop with a 3pFfarad input capacitance is used here. A device of this type belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. 16pins are included in its design. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. In this case, the maximum supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 7 circuits. Due to its reliability, this T flip flop is well suited for TR. In order to ensure high efficiency, the supply voltage should remain at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 5.2mA. Currently, there are 3 lines of input. There is 8μA quiescent current consumption by it.
SN74HC174DR Features
Cut Tape (CT) package
74HC series
16 pins
SN74HC174DR Applications
There are a lot of Texas Instruments SN74HC174DR Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Individual Asynchronous Resets
- Test & Measurement
- Divide a clock signal by 2 or 4
- Count Modes
- Asynchronous counter
- High Performance Logic for test systems
- Automotive
- CMOS Process
- Bounce elimination switch
