SN74HC174PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 40 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 3 |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC174PW Overview
It is embeded in 16-TSSOP (0.173, 4.40mm Width) case. A package named Tubeincludes it. T flip flop uses Non-Invertedas the output. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2V~6Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. It belongs to the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 50MHz. In total, it contains 1 elements. It consumes 8μA of quiescent Terminations are 16. This D latch belongs to the family of 74HC174. A voltage of 5V is used as the power supply for this D latch. A 3pFfarad input capacitance is provided by this T flip flop. HC/UHis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. It is designed with 16 pins. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be kept above 2V. To achieve this superior flexibility, 7 circuits are used. In order to ensure high efficiency, the supply voltage should remain at 5V. It offers maximum design flexibility with its output current of 5.2mA. It is reported that there are 3 input lines.
SN74HC174PW Features
Tube package
74HC series
16 pins
SN74HC174PW Applications
There are a lot of Texas Instruments SN74HC174PW Flip Flops applications.
- CMOS Process
- Frequency Dividers
- Clock pulse
- Functionally equivalent to the MC10/100EL29
- Control circuits
- Registers
- Computing
- Data Synchronizers
- Supports Live Insertion
- Instrumentation
