SN74HC174PWR
| Parameters | |
|---|---|
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 27 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 40 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 3 |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
SN74HC174PWR Overview
It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~6V. The operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. The 74HCseries comprises this type of FPGA. Its output frequency should not exceed 50MHz. There are 1 elements in it. Terminations are 16. Members of the 74HC174family make up this object. Power is provided by a 5V supply. JK flip flop input capacitance is 3pF farads. A device of this type belongs to the family of HC/UH. Electronic part Surface Mountis mounted in the way. A total of 16pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part is included in FF/Latches. 6Vis the maximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Despite its superior flexibility, it relies on 7 circuits to achieve it. In view of its reliability, this D flip flop is a good fit for TR. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Its output current of 5.2mAallows for maximum design flexibility. As of now, there are 3input lines. It consumes 8μA current.
SN74HC174PWR Features
Tape & Reel (TR) package
74HC series
16 pins
SN74HC174PWR Applications
There are a lot of Texas Instruments SN74HC174PWR Flip Flops applications.
- ESD protection
- Counters
- Registers
- Count Modes
- Frequency Divider circuits
- Control circuits
- Clock pulse
- High Performance Logic for test systems
- Circuit Design
- Dynamic threshold performance
