SN74HC175NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Clock Frequency | 60MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| RoHS Status | ROHS3 Compliant |
SN74HC175NG4 Overview
The flip flop is packaged in 16-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates with an input voltage of 2V~6V volts. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74HC series. It should not exceed 60MHzin terms of its output frequency. D latch consists of 1 elements. It consumes 8μA of quiescent current without being affected by external factors. It is a member of the 74HC175 family. A 3pFfarad input capacitance is provided by this T flip flop.
SN74HC175NG4 Features
Tube package
74HC series
SN74HC175NG4 Applications
There are a lot of Texas Instruments SN74HC175NG4 Flip Flops applications.
- Registers
- Data Synchronizers
- Bounce elimination switch
- Guaranteed simultaneous switching noise level
- Single Up Count-Control Line
- Test & Measurement
- Clock pulse
- Bus hold
- Counters
- Pattern generators
